DIN-Rail Glasvezelbox 6-v

Productomschrijving

DIN-Rail Glasvezelbox is uitermate geschikt voor kleine omgevingen zoals in meterkasten, straatkasten of 19inch behuizingen. Deze box is geschikt voor maximaal 12 stuks ANT of Crimp lassen.

Geschikt voor 6x SC Duplex of 6x LC Quad of 6x ST Duplex koppelbussen

2x kabel in/uitgang-poorten

Splicing module voor max. 12 vezels

Crimp lasbeschermers

Afmetingen: 139x152x35mm

Eigenschappen

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.